TITAN 200 TC

Key Benefits/Features:
 User-friendly TOUCH CONTROL, fully programmable backgauge control with
99 channels, 9,801 total cut memory
 Variable mode data entry (fraction, decimal, metric)
 Automatic fraction to decimal calculation
 Programmable clamp pressure control - per cut 
 Bright red LED cut line light – maintenance free
 Table slot closure device
 Hydraulic cutting & clamping – motor runs only during cutting cycle
 Rugged steel & cast iron construction
 Lockable heavy duty casters for portability
 Top of machine offers large 14.5” x 36”/36.8 cm x 91 cm) work surface
 2-year warranty

Safety Features:
 UL/cUL listed and conforms to CE and ANSI B65.3 safety specifications
 Two-hand cut buttons to activate cutting cycle – timed, non-repeat
 Cutting area protection – light beam safety curtain
 Independent mechanical foot pedal clamping
 Fully enclosed sheet metal rear table safety cover
 OPTIONAL Ergo-touch cut buttons reduce operator fatigue (ADDITIONAL $844 - MUST BE SPECIFIED WHEN ORDERING)
Standard Equipment Included: (2) high speed steel knives, (3) plastic cutting sticks,
(1) jogging aid, (1) manual, (1) tool kit, & (1) knife change safety holder assembly

TOUCH CONTROL - Key Benefits/Features:
 10.5” color touch screen control panel
 USB port for simple thumb drive program storage and software upgrades when
available from the www.challengemachinery.com website.
 Recognizes .csv program files making offline programming simple to implement
 Repeat and Loop commands streamlines program entry
 Auto-programming sheet division with animated graphics
 Programmable clamp pressure per cut
 Automatic false clamp plate detection
 Electric hand-wheel for manual backgauge adjustment
NEW GRAPHICAL DISPLAY MODULE DURING PROGRAM ENTRY – A CHALLENGE
EXCLUSIVE INNOVATION!!
The graphical representation of the cutting Once the program is manually entered,
sequence during programming assists the the operator has a graphical display of the
operator with accurate cut entry allowing programmed steps they can follow as they
the operator to visualize the job layout! process the job through the cutting sequence.
Now everyone can enjoy graphical
assistance…not just JDF generated jobs!

SPECIFICATIONS
Cutting Width 20”/50.8 cm
Clamp Opening 3-1/4”/8.3 cm
Clamping Force
minimum 1,250 lbs/563 daN
maximum 2,500 lbs/1,125 daN
Min Cut (w/out false clamp plate) 1/2”/13 mm
Min Cut (with false clamp plate) 1-7/8”/4.8 mm
Table In Front of Knife 15-1/4“/39 cm
Behind Knife 20”/50.8 cm
Table Height 36”/91.4 cm
Metal side tables (light beam only) 8” x 12”/21 x 31 cm
Overall Width 36”/91.4 cm
Overall Length 50-7/8”/129.3 cm
Overall Height 53”/135 cm
Will pass through door (assembled) 39-3/4”/101 cm
(side tables, light beams, & power
switch out) 36-1/4”/92 cm
(table/treadle/light beams out) 29”/73.7 cm
Net Weight (approx.) 800 lbs/363 kg
Shipping Weight (approx.) 980 lbs/444 kg
ELECTRICAL UL/CUL LISTED & CE
1 ½ H.P., Single-Phase, AC, 60 Hz, 208/230 Volts, 12 Amps,
Service size 15 Amps. Power cord included.
Requires Receptacle Type: NEMA 6-15R or 6-20R.

Optional / Additional ACCESSORIES List:

Plexiglas Shield Machine Side Tables
12” x 19” #K-44103 $ 559 (if ordered with cutter)

Knocked Down (skid will go thru 32” door) $ 405.00

Inlaid High Speed Steel #A-10034-1

Inlaid Carbon Alloy Tool Steel #A-10034

False Clamp Plate #AA-10061

Book Trimming False Clamp Plate #AA-10062 

Magnetic Clamp Pads #50082 

(Package of Two – 3” x 15” each)

Plastic Cutting Sticks (Sold by the Dozen)
#4166 

Book Guides (priced per each) #5-7-M361 

Jogging Aid #A-12608-2 

Rykon 100 Hydraulic Oil (capacity 1 gallon)
(Five Gallon Container) #S-1991-4 

Knife Lifter Assembly #43108